Product Details
Built for large 120 volt AC load demands, this 6000 watt pure sine inverter is designed to output one single leg of 120VAC power at the full rated 6000 watts. It features a 48VDC input, enhancing efficiency and allowing for smaller DC cables compared to 12VDC or 24VDC systems. The inverter includes a built-in smart battery charger and an automatic transfer switch for accepting utility or generator power. Equipped with a 300% surge capacity for up to 20 seconds, it is capable of starting pumps, motors, and compressors without overloading. Key features of this inverter include a 6000 watt low frequency inverter with 110 VAC single phase, an 18000 watt surge for 20 seconds, a battery priority selector, terminal block, marine coating, a multi-stage smart charger rated at 80 amps, a remote panel option, auto generator start, selectable 60Hz or 50Hz via dip switch, and an optional 25W power save mode. The inverter output specifications include a continuous output power of 6000 watts, a surge rating of 18000 watts for 20 seconds, and a pure sine waveform, with nominal efficiency exceeding 88% (peak) and line mode efficiency over 95%. The output frequency is selectable at 50Hz +/- 0.3Hz or 60Hz +/- 0.3Hz, with a typical transfer time of 10ms. The total harmonic distortion is less than 10%. The input specifications consist of a nominal input voltage of 48.0VDC, low battery alarm threshold between 42.0VDC-44.0VDC, low battery trip range of 40.0VDC-42.0VDC, high voltage alarm at 64.0VDC, and a low battery voltage restart at 62.0VDC. Idle consumption is rated at 4.16 amps DC, with power saver mode idle consumption being less than 0.83 amps DC.
