Product Details
The manual 20-ton floor press is a fast, quiet, and dependable utility press designed for shops with limited space, offering economical operation and smooth performance. It is well-suited for tasks such as pressing bearings, bushings, staking, broaching, clamping, straightening, and bending. The ram moves side to side in the head frame, allowing the workpiece to remain stationary while accommodating off-center work. The pump is conveniently mounted on the frame, and a gauge provides pressure readings. The cylinder and pumping unit design enables the press to maintain pressure with minimal bleed-off. An adjustable table can be set to a comfortable working height, secured by table pins during pressing operations. The pressure is preset and locked at the factory to ensure maximum pressing with low operating pressures. Assembly is quick, taking just minutes, and it occupies minimal floor space. The kit includes two multi-purpose table plates, a nose piece, and a stepped nosepiece for bearing applications. The press features a single-acting cylinder with a maximum press capacity of 20 tons, a ram diameter of 2 inches, and a ram stroke of 8 inches. The head travels left and right of center with an approximate ram travel per stroke of 3/16 inch. The width between uprights is 23 inches, with a width between channels of 4 inches, and a maximum ram-to-table height of 39 inches. Overall, the press stands at a height of 74 inches and weighs 283 pounds.
