Product Details
The Transforming Technologies GK1000 ESD table mat grounding kit includes all hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 standards to ground an ESD table mat. The kit features the CP2522 low profile common point ground with two banana jacks that allow two workers to connect to a single ground point. The molded connection point contains a 1 meg ohm 1/4 watt resistor. The ground cord attaches to table mats using the CS1090 universal snap kit, which includes a 10 mm stud, 10 mm socket, threaded backing washer, conical nut, long screw (0.375" length), short screw (0.25" length), and an ESD common point ground label. The kit enables installation of a stud or socket on all soft materials up to 0.375" thick using 6-32 flat head Phillips machine screws and only requires a Phillips screwdriver. ESD standards mandate one ground point per mat or every 10 ft of ESD matting. This kit meets or exceeds the requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
