Product Details
The kit features a 45-degree bent long nose tapering from a wide base to a fine tip, designed to access hard-to-reach spaces by going around obstructions. To ensure the tip consistently grasps the tiniest wires or parts, the base of the jaws is relieved with a small gap of 0.3 mm ± 0.1 mm to prevent contact that would keep the tips from closing tightly together. The fine crosscut teeth are oriented at 120 degrees to each other—60 degrees to each side of the jaw centerline—with serrations cut in two passes to form fine, regularly spaced diamond-shaped teeth, providing uniform contact across the jaw surface for grasping, pulling, and twisting evenly in any direction. The teeth extend along the full length of the jaw, maximizing the size and usefulness of the contact area. Integrated wire cutters form the second half of this versatile two-in-one design, cleanly snipping soft metal wires such as copper, aluminum, brass, and silver in sizes 38 to 14 AWG. A recessed coil spring gently assists the opening action and is neatly tucked between the handles to avoid interference or accidental dislodging; the spring features a relaxed opening angle of 137 degrees—nearly twice the plier’s opening angle—and is coiled twice to balance the forces needed to open and close the pliers, improving control and reducing hand fatigue. The wide profile handles are generous in size with a wide, flat design that creates a large contact area for fingertips to rest comfortably and exert precise control, enhanced by slim vinyl grips that provide cushioning and a nonslip surface without bulk. The product includes a warranty covering defects in materials and workmanship.
