Product Details
The dock board is designed to enhance loading operations, minimize accidents, and reduce labor costs. It features an anti-skid diamond tread surface and beveled curbs for maximum safety. Constructed from lightweight, high-strength aluminum, the board is resistant to corrosion and includes full-length welded aluminum curbs to provide extra rigidity and prevent operator run-off. A full-length handgrip along the curb enhances ease and safety in handling. The safety stop on the underside of the board ensures it fits snugly between the truck and dock, preventing movement under load. An 11-degree angle is standard unless a different angle is specified, and the entry lip measures 11" with a rounded nose to protect tires. The dock board complies with OSHA requirements 1910.30(a) and can be reversed when the truck is lower than dock level. The capacity is based on the combined weight of the maximum pallet load and lift truck, rated for a single shift at equipment speeds of up to 3 mph. For multi-shift operations or when using 3-wheeled forklifts with paper roll clamps, an additional 5,000 lbs. should be added to the board capacity. The width of the board should be 12" greater than the lift truck or load, with a popular width of 60", while the usable width is 4" less than the overall width. It is important to note that stackers, 3-wheeled forklifts, and other narrow aisle loaders should not be used on a dock board, and special dock boards are required for refrigerated trucks.
