Product Details
The Jet designed certified Meehanite® casting features enhanced ribbing to ensure rigidity and tolerance retention, complemented by a swing away control box that houses an e-stop, putting all controls at the operator's fingertips. The machine base is innovatively designed for easier leveling without the need to raise the machine off the floor. An automatic oiler provides lubrication at a rate of 3 to 6 cc/cy every 30 minutes, while a heavy-duty spindle brake enhances safety by stopping the spindle and interrupting power to prevent accidental start-ups. The electrical box is positioned at the back of the mill and contains two 115V outlets for powered accessories, and the machine is CSA/CUS certified. It is equipped with Class 7 spindle bearings that support the spindle for maximum rigidity during heavy cutting applications, and the spindle head is internally cooled to extend the life of bearings, belts, and the motor. The table and ways are hardened to 54 HRC and precision ground for enhanced accuracy, with X and Y-axis coated in Turcite-B for reduced vibration and smooth movements. Additional features include a swing away safety shield, LED work lamp, chip pan, dual locks on all moveable surfaces, way covers, drawbar, and a toolbox with tools. Specifications include a digital readout of Newall DP700, a 3-axis knee design, powerfeed on the X, Y, and Z-axis, R-8 spindle taper, a table size of 9 x 49 inches, quill diameter of 3-3/8 inches, variable spindle speeds ranging from 60 to 4,500 RPM, quill down feed rates of .0015 - .003 - .006 inches per revolution, 5 inches of spindle travel, head movement of 90° right and left, 45° front and back, maximum distance from spindle to table of 20-3/4 inches, and distance from spindle to column ranging from 4-3/4 inches to 18-1/8 inches. The collet capacity is from 1/8 to 7/8 inches with a table longitudinal travel of 36 inches, and 30-3/4 inches with powerfeed, along with a table cross travel of 12-5/8 inches, and T-slots number and size of 3.
