Product Details
The AC gearmotor features a parallel shaft design with a rating of 1/6HP and operates at 40 RPM, with a gear ratio of 43 to 1. It supports an overhung load of 303 pounds and has a full load torque of 219 lb. in. The motor has a totally-enclosed fan-cooled (TEFC) enclosure and a 38 frame size, operating at 115/230V, 1PH, with a nameplate amp rating of 2.1. Designed for continuous duty and general purpose applications, this single-phase gearmotor employs a permanent split capacitor and is suitable for 115/230VAC, 60/50 Hertz input with starting torques equal to running torques. It features precision machined steel in-line gearing with a first-stage steel helical gear followed by spur type gears, and uses semi-fluid grease for lubrication, minimizing leakage risk and ensuring permanent lubrication. The output shafts are equipped with needle bearings to handle high load capacities and are made of hardened steel. Suitable for mounting at any angle, the design recommends avoiding a shaft-up position with the motor below to prevent lubricant leakage into the motor. A torque limiting provision is suggested to prevent gearhead damage in stalled conditions, particularly in ratios of 60:1 and above. The listed torque values represent recommended full load torque for extended gear life, with overhung load capacities measured at the center of the output shaft. The gearmotor includes a continuous duty "run" capacitor, although a conduit box is not provided. It also shares mounting dimensions with Bodine model D and Z gearmotors, Bison 100 gearmotors, Baldor/Boehm PSS, and many Dayton gearmotors.
