Product Details
The kit is designed for removing bearings, gears, discs, and similar components and includes a manual adjustment knurl for rapid loosening and adjusting of the extractor jaws on the cross-beam without the need for a wrench. It features compatibility with various pulling hooks and allows for variable reach through jaw extensions. The turning of the pulling hooks facilitates both internal and external use, making it suitable for asymmetric workpieces. A spindle head band prevents the wrench from slipping off, while almost all components are available as replacement parts, supported by a time-saving order process through a numbering system. The hydraulic spindle series 8-0 is designed for particularly tight parts and is available from specific puller sizes, and the auxiliary hydraulic ram series 9 serves the same purpose. It also includes pressure pads from series 600-17, which are recommended for hollow shafts where support cannot be provided. Key features include standard pulling hooks with quick adjusting capability, parallel pulling hooks that function in every position even under full load, and infinitely variable adjustment on the cross-beam. The kit ensures optimal adjustment of the spindle to the shaft with a 2-sided spindle tip (ball and tip) and incorporates a mechanical pressure screw with a milled thread treated with special coating. The three-arm design distributes the load evenly and securely holds the part being removed, while the pulling hooks sliding parts must stabilize fully on the cross-beam. Caution is advised to follow a step-by-step process when removing multiple parts, ensuring that pulling hooks support surfaces remain straight and fully positioned beneath the part to be removed. Notably, usage of electrical or pneumatic servo screwdrivers or hammer drills is prohibited, and protective gear such as a protective blanket and goggles is required. The dimensions include a space next to it of 2 5/8".
