Product Details
This kit is designed for the removal of bearings, gears, discs, and similar components, featuring a spindle head band that prevents the wrench from slipping off. It includes standard pulling hooks with automatic self-centering capabilities and a two-arm design that allows for space-saving operation. The kit ensures optimal adjustment of the spindle to the shaft with a two-sided spindle tip, available in ball and tip configurations. A mechanical pressure screw with a milled thread treated with a special coating enhances durability. For safe use, the pulling hooks' sliding parts must maintain stable and full contact with the cross-beam during operation. When removing multiple parts, a step-by-step approach is recommended. The pulling hooks' support surfaces should be straight and sit completely beneath the part to be removed. The use of electrical or pneumatic servo screwdrivers or hammer drills is prohibited, and protective gear, including a blanket and goggles, is required. The kit has a maximum load capacity of 9.5 metric tons, a spread range of 23 to 300mm, and a depth of 250mm. Its specifications also include a space next to it measuring 40mm, a space below of 16mm, a maximum torque of 200Nm, and a hexagon drive (male) of 24mm. The space next to it measures 1 5/8 inches, while the space below it measures 5/8 inches.
