Product Details
The kit is designed for removing bearings, gears, discs, and similar components, featuring a spindle head band that prevents the wrench from slipping off. It includes a standard pulling hook and automatic self-centering pulling hooks that ensure even load distribution and secure holding of the part to be removed. The optimal adjustment of the spindle to the shaft is facilitated by a two-sided spindle tip (ball and tip) and a mechanical pressure screw, with the milled thread treated with a special coating. The pulling hooks sliding parts must sit stably and completely on the cross-beam, and if multiple parts need to be removed, a step-by-step approach should be followed without removing several parts simultaneously. Additionally, the pulling hooks support surfaces should be straight and fully beneath the part being removed, and the use of electrical or pneumatic servo screwdrivers or hammer drills is prohibited. Required safety measures include the use of a protective blanket and protective goggles. The kit specifications include a space next to it of 20mm, a maximum load of 4t, a maximum torque of 50nm, a space below of 7mm, a spread of 12 - 100mm, depth of 100mm, and a hexagon drive (male) of 13mm. In imperial units, the space next to it is 3/4" and the space below is 1/4".
