Product Details
The kit is designed for the efficient removal of bearings, gears, discs, and similar components, featuring a spindle head band that prevents the wrench from slipping off during operation. It includes standard pulling hooks and automatic self-centering pulling hooks, with a two-arm design that allows for space-saving use. The spindle is optimally adjusted to the shaft using a 2-sided spindle tip, which incorporates both a ball and a tip. The kit is equipped with a mechanical pressure screw and a milled thread treated with a special coating for enhanced durability. Replacement parts are readily available through a time-saving order process facilitated by a numbering system. The design mandates that the pulling hooks' sliding parts must always sit stably and completely on the cross-beam, and it is essential to follow a step-by-step process when removing several parts. Safety requirements include the use of a protective blanket and goggles, and it is explicitly advised not to employ electrical or pneumatic servo screwdrivers or hammer drills. The kit has a space below of 3/8" and a maximum torque of 85Nm, with a hexagon drive (male) of 17mm. The overall dimensions include a depth of 120mm, a space below of 10mm, a space next to it of 30mm, and a spread of 18 - 120mm. The maximum load capacity is rated at 5T, with an additional space next to it measuring 1 3/16".
