Product Details
The BLUFF® Steel Red Pin Heavy Duty Dock Board features dual positioning pins on each side for added flexibility and safety, making it ideal for challenging angled parking situations where trailers cannot align directly with the dock. It is flexible enough to accommodate refrigerated trailers and overseas containers, constructed with all-welded steel for durability in high-traffic, multiple-shift docks. The board has full-length side pockets and four 1" diameter high-strength locking pins spaced on 2" centers for increased adjustability and safety. Trucks positioned below dock level can use the board without reversing it, while fold-down lifting loops measuring 11"W x 4"H on 27" centers enable easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. The board includes one 7° bend located 17" from the dock end and one 9° bend 8" from the truck end. It complies with OSHA specification 1910.30(a) and ANSI specification MH30.2. The capacity is rated for the combined weight of the maximum pallet load and lift truck at equipment speeds up to 3 mph; stackers and narrow aisle loaders are not recommended for use. The width should be 12" greater than the lift truck or load, with a usable width that is 6" less than the overall width. The height difference (HT") refers to the height above the dock, with a 14% grade applicable for pallet trucks and electric forklifts and a 19% grade for gas-powered forklifts. Application height ranges up to 13" above dock or 5.5" below dock with propane or gas forklifts, and up to 10" above dock or 5.5" below dock with electric forklifts or pallet jacks.
