Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters include a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the appropriate starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage. Confirm whether it is single-phase or three-phase power and choose a starter rated for current (amps) higher than the FLA. Select the control power used to close the contactor and choose the overload by selecting a current range that encompasses the FLA. Further options include the type of incoming power; if the line power is used as the control power, it is a "direct-online starter." If the control voltage differs from the line voltage, it is classified as "separate control voltage." For activation from an external switch, "remote start terminals" can be added, which assumes the line and control voltages are the same. For configurations using different line and control voltages, it is termed "separate control voltage + remote start terminals." Key features include a 9A 3 phase direct online reset button, a 100-250V AC/DC coil, and an overload relay range of 4.2-5.7A, all housed in a NEMA 4X polycarbonate enclosure.
