Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is single-phase or three-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor, select the control power used to close the contactor, and choose the overload by selecting a current range that contains the FLA of the motor. The optional criteria include incoming power, where a "direct-online starter" uses line power for control power, whereas "separate control voltage" applies if the control voltage differs from the line voltage. "Remote start terminals" are available for activation from an external switch, and if different voltages are used for line and control power, it is referred to as "separate control voltage + remote start terminals." The starter features include 9A capacity, three-phase operation, separate control voltage, start/stop functionality, a 24-60V AC/DC coil, 1.7-2.3A overload relay, and NEMA 4X polycarbonate construction.
