Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. The assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply. Ensure to confirm whether it is single-phase or three-phase power to the motor, and choose a starter rated for current (amps) higher than the FLA of your motor. The control power used to close the contactor must also be selected, along with the overload by selecting a current range that contains the FLA of the motor. Additional optional criteria include the incoming power; if the line power is used as the control power, it is referred to as a "direct-online starter." If the control voltage differs from the line voltage, it is considered "separate control voltage." For activation from an external switch, terminals can be added to accept the control power input, designated as "remote start terminals." For those needing remote start terminals with different line and control voltages, this is classified as "separate control voltage + remote start terminals." The features of the motor starter include a 9A rating, three-phase operation, direct online functionality, a reset button only, a 100-250V AC/DC coil, a 1.7-2.3A overload, and a NEMA 4X polycarbonate enclosure.
