Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters rated up to 60HP or 80A. These assembled motor starters include a contactor, an overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the appropriate starter for your requirements, it is crucial to refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage; ensure you identify whether the motor operates on single-phase or three-phase power and select a starter rated for current higher than the FLA. The control power needed to activate the contactor should also be determined, followed by selecting an overload based on a current range that encompasses the FLA of the motor. Additional options include selecting between a "direct-online starter," which uses line power for control, or a "separate control voltage," where the control voltage differs from the line voltage. If activation is required from an external switch, provisions for "remote start terminals" can be added, with the understanding that line and control voltages may be the same or different. The technical specifications of the starters include features such as a 12A rating, three-phase operation, a separate coil voltage with remote start terminals, a reset button, a coil voltage range of 250-500V AC/DC, and an overload relay rated at 7.6-10A. The device is designed for durability and compliance with relevant electrical safety standards.
