Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage. Confirm whether it is single-phase or three-phase power to the motor and choose a starter rated for current (amps) higher than the FLA of your motor. The control power used to close the contactor and the overload needs to be selected based on a current range containing the FLA of the motor. Incoming power options include a "direct-online starter," where the line power is used as the control power, or "separate control voltage," where the control voltage differs from the line voltage. For activation from an external switch, terminals can be added to accept control power input, referred to as "remote start terminals." If different voltages for line and control power are needed, the configuration is termed "separate control voltage + remote start terminals." Key features of the motor starter include a rating of 12A, 1 phase, a separate coil voltage with a reset button only, a 100-250V AC/DC coil, a 2.3-3.1A overload relay, and a NEMA 4X polycarbonate enclosure, ensuring compliance with various standards. The product is backed by warranty information specific to the manufacturer’s terms.
