Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is 1-phase or 3-phase power to the motor and choosing a starter rated for current (amps) higher than the FLA of your motor. The control power to close the contactor should also be selected, along with the overload by choosing a current range that contains the FLA of the motor. The starter can further be specified based on incoming power options; if the line power is used as the control power, it is a "direct-online starter," while if the control voltage differs from the line voltage, it is a "separate control voltage." For activation via an external switch, terminals for control power input are added, known as "remote start terminals." The product features a 16A 3 phase direct online start/stop capability with a 250-500V AC/DC coil and a 10-13A overload relay, all housed in a NEMA 4X polycarbonate enclosure.
