Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is 1-phase or 3-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor, select the control power used to close the contactor, and choose the overload by selecting a current range that contains the FLA of the motor. The incoming power can be a direct-online starter if the line power is used as control power, or a separate control voltage if the control voltage differs from the line voltage. Remote start terminals are available for activation from an external switch, which assumes that the line voltage and control voltage are the same. If using different voltages for line and control power with remote start terminals, it is referred to as separate control voltage + remote start terminals. The features of this specific starter include a rating of 38A, 1 phase, direct online operation, a reset button only, a 100-250V AC/DC coil, a 29-35A overload relay, all housed in a NEMA 4X polycarbonate enclosure.
