Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. The assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, you should verify the full load amperage (FLA) at the input voltage from the motor or equipment nameplate, confirming whether it is single-phase or three-phase power to the motor. It is necessary to choose a starter rated for current (amps) higher than the FLA of your motor, select the control power used to close the contactor, and choose the overload by selecting a current range that contains the FLA of the motor. Optional criteria include incoming power configurations such as "direct-online starter" where line power is also used as control power, "separate control voltage" for different line and control voltages, and "remote start terminals" for activating the starter from an external switch, which assumes that the line and control voltages are the same. Additionally, if using different voltages for line and control power along with remote start terminals, this is known as "separate control voltage + remote start terminals." The motor starters feature a 38A rating, are designed for one phase with separate coil voltage, and include a reset button, supporting a coil voltage range of 100-250V AC/DC, and a 24-29A overload relay, all enclosed in a NEMA 4X polycarbonate housing.
