Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is single-phase or three-phase power to the motor. Choose a starter rated for current (amps) higher than the FLA of your motor, and select the control power used to close the contactor. Choose the overload by selecting a current range that contains the FLA of the motor. Optional criteria include incoming power configuration, such as a "direct-online starter" when line power is also the control power, or "separate control voltage" when the control voltage differs from the line voltage. Remote start terminals can be added for activation from an external switch while maintaining the same line and control voltage, or for configurations where different voltages are used. The specific features of the starters include a rating of 65A, 1 phase, separate coil voltage with remote start terminals, a reset button only, a 100-250V AC/DC coil, a 50-60A overload relay, and compliance with NEMA 4X standards.
