Product Details
The DC gearmotor features a parallel shaft design with specifications that include a power rating of 1/20HP, a speed of 10 RPM, and a gear ratio of 180 to 1. It has an overhung load capacity of 155 pounds and a full-load torque of 100 lb. in. The motor is housed in a totally-enclosed non-ventilated (TENV) enclosure and has a 30 frame size, operating at 90V with a nameplate current of 0.54 amps. It is a totally enclosed, permanent magnet DC gearmotor, optimized for continuous duty. Notable attributes include precision machined in-line steel gears, featuring a first stage steel helical gear followed by spur-type gears, with permanent semi-fluid grease lubrication to minimize leakage. The output shafts, made of hardened steel, are supported by needle bearings for enhanced load capacities. It is advisable to mount the motor at an angle, avoiding installation below the reducer to prevent lubricant leakage in case of seal failure. The stall torque may exceed the recommended full load torques, necessitating the use of a current limiting device if such conditions are anticipated. The gearmotor is compatible with various models, including Baldor GPP231108, Bison 011-190-0186, and Bodine models 163, 197, and 198, all operating at 90V DC. Additionally, for Grainger/Dayton, it is compatible with model 6Z912, requiring the installation of conduit box kit M1760021 (Leeson).
