Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. The assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is 1-phase or 3-phase power to the motor. Choose a starter rated for current (amps) higher than the FLA of your motor, select the control power used to close the contactor, and choose the overload by selecting a current range that contains the FLA of the motor. The starter options can be narrowed down based on incoming power type: "direct-online starter" if line power is used as control power, "separate control voltage" if the control voltage differs from line voltage, or "remote start terminals" if activation is needed from an external switch. If remote start terminals are required and different voltages for line and control power are used, this is referred to as "separate control voltage + remote start terminals." Key features include 9A 3-phase remote start terminals, start/stop functionality, a 100-250V AC/DC coil, and a 1.7-2.3A overload relay, all housed in a NEMA 4X polycarbonate enclosure.
