Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, and confirm whether it is 1 phase or 3 phase power to the motor. Choose a starter rated for current (amps) higher than the FLA of your motor. Select the control power used to close the contactor and choose the overload by selecting a current range that contains the FLA of the motor. Optional criteria include incoming power configuration: a "direct-on-line starter" if line power is used as control power, "separate control voltage" if the control voltage differs from line voltage, and the option to add terminals for control input from an external switch, referred to as "remote start terminals." For configurations requiring different voltages for line and control power, this is referred to as "separate control voltage + remote start terminals." Key features of the kit include 9A, 1 phase, a separate coil voltage, a reset button only, a 100-250V AC/DC coil, and a 7.6-10A overload protection. The NEMA 4X polycarbonate enclosure provides a durable and weather-resistant housing for the components.
