Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, ensuring whether it is single-phase or three-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor and select the control power used to close the contactor. The overload should be chosen by selecting a current range that contains the FLA of the motor. Additionally, the following options can be specified: Incoming power can be either a "direct-online starter" if the line power is also used as control power, or "separate control voltage" if the control voltage differs from the line voltage. For activation from an external switch, "remote start terminals" can be added, assuming the line and control voltages are the same, or designated as "separate control voltage + remote start terminals" if different voltages are used. Key features include a 9A 1-phase direct online reset button only, a 100-250V AC/DC coil, and an overload range of 5.7-7.6A, all within a NEMA 4X polycarbonate enclosure.
