Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters suitable for motors up to 60HP or 80A. These assembled motor starters consist of a contactor, an overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the appropriate starter, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is 1-phase or 3-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor, and select the control power used to close the contactor. The overload must be chosen based on a current range that encompasses the FLA of the motor. Additional options for selection include the type of incoming power, such as a direct-online starter where line power also serves as control power, or a separate control voltage setup. For starters activated from an external switch, remote start terminals can be added, and if different voltages are used for line and control power, a combination of separate control voltage and remote start terminals can be specified. The key features include a 12A 3-phase separate coil voltage, remote start terminals, and a start/stop capability with a 100-250V AC/DC coil and 2.3-3.1A overload rating, all housed in a NEMA 4X polycarbonate enclosure.
