Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, and confirm whether it is 1-phase or 3-phase power to the motor. Choose a starter rated for current (amps) higher than the FLA of your motor, select the control power used to close the contactor, and then choose the overload by selecting a current range that contains the FLA of the motor. The incoming power options include a "Direct-On-Line Starter" if the line power is used as the control power, "Separate Control Voltage" if the control voltage differs from the line voltage, and "Remote Start Terminals" if the starter needs to be activated from an external switch. For configurations requiring both different line and control voltages with remote start terminals, this is referred to as "Separate Control Voltage + Remote Start Terminals." The features include a 12A 1-phase separate control voltage start/stop with a 24-60V AC/DC coil and a 4.2-5.7A overload, all housed within a NEMA 4X polycarbonate enclosure.
