Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, and confirm whether it is 1-phase or 3-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor. Additionally, select the control power used to close the contactor and choose the overload by selecting a current range that contains the FLA of the motor. The selection process can be narrowed by considering the incoming power; if the line power will be used as the control power, this is a "direct-online starter." If the control voltage is not the same as the line voltage, it is classified as "separate control voltage." If activation from an external switch is required, terminals can be added for remote start capability, assuming the line and control voltages are the same. The features include a 12A 1-phase separate coil voltage with a reset button that operates on 100-250V AC/DC coil and provides a current range of 3.1-4.2A overload protection. The product is housed in a NEMA 4X polycarbonate enclosure.
