Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. The assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, confirming whether it is single-phase or three-phase power. Choose a starter rated for current (amps) higher than the FLA of your motor. Additionally, select the control power used to close the contactor and the overload by selecting a current range that contains the FLA of the motor. The optional criteria for selection include incoming power, where line power can either be used as control power ("direct-online starter") or different ("separate control voltage"). For activation from an external switch, remote start terminals can be added, and if different voltages are used for line and control power, this is referred to as "separate control voltage + remote start terminals." Key features of the product include 16A 3-phase separate coil voltage, remote start terminals, a start/stop mechanism, a 250-500V AC/DC coil, and a 16-20A overload rating, all housed in a NEMA 4X polycarbonate enclosure.
