Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter for your requirements, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage you will supply, and confirm whether it is single-phase or three-phase power to the motor. Choose a starter rated for current (amps) higher than the FLA of your motor. The control power used to close the contactor and the overload must be based on the FLA of the motor. For optional criteria, if the line power will be used as the control power, this is referred to as a "Direct-On-Line" starter. If the control voltage differs from the line voltage, this is known as "Separate Control Voltage." The starter can also include remote start terminals to accept control power input from an external switch, and can be configured as "Separate Control Voltage + Remote Start Terminals" if different voltages are used. Key features include a 52A rating, 1 phase, Direct Online operation, a reset button, a 100-250V AC/DC coil, a 36-47A overload, and a NEMA 4X polycarbonate enclosure.
