Product Details
Springer Controls manufactures a complete line of IEC enclosed AC motor starters up to 60HP or 80A. Assembled motor starters consist of a contactor, overload relay, and a NEMA 4X rated polycarbonate enclosure. To select the proper starter, refer to the motor or equipment nameplate to verify the full load amperage (FLA) at the input voltage. Confirm the requirement for single-phase or three-phase power to the motor and choose a starter rated for current (amps) higher than the FLA. Select the control power used to close the contactor and the overload by selecting a current range that contains the FLA. The options include incoming power types, where line power can be used as control power, referred to as a "direct-online starter," or a separate control voltage which differs from the line voltage. If activation from an external switch is needed, terminals for control power input can be added, referred to as "remote start terminals." Key features include an 80A rating, 3-phase configuration, separate coil voltage with remote start terminals, reset button only, 250-500V AC/DC coil, and a 65-78A overload relay. The product complies with relevant industry standards and dimensions align with typical installation requirements.
